Glassing progress

I (Courtney) am out at Wavey Creek for the weekend, probably, due to a nasty storm. Just as well, there's lots of work to be done glassing this puppy.

Today Dad and I fit four swaths of 10 oz. fibreglass cloth. The inside layer on each side goes from the keel to a little above the waterline, then is covered by an outer layer from the keel to the sheer. Both sides are now pinned in place; we'll do the laminating epoxy tomorrow.

Here's a picture showing the glass on the starboard side (I actually took this shot before we did the port side). The arrows trace the line of the inner layer. It's still a little loose (and long) along the sheer; we'll trim it later. So far so good!